NONA ELEVATOR is a professional supplier of elevator and escalator spare parts, providing Elevator Steel Belts and modernization solutions for global customers. Proper maintenance is essential to ensure reliable elevator operation, extend belt service life and reduce unexpected downtime.
Elevator Steel Belts (polyurethane traction belts) are core load-bearing components of modern machine-room-less elevators. With proper maintenance, a high-quality steel belt can deliver a designed service life of 15 years or more. Poor maintenance, however, can significantly shorten its lifespan, lead to unexpected breakdowns and increase total operating costs.
Unlike traditional wire ropes, Elevator Steel Belts require specific maintenance procedures focused on surface condition, tension control and sheave compatibility. Below is a practical guide to Elevator Steel Belt maintenance, helping you maximize service life, ensure passenger safety and minimize lifecycle costs.
1. Perform Regular Visual and Surface Inspections
Visual inspection is the first and most basic step in Elevator Steel Belt maintenance, and it should be carried out at least once every 1–3 months depending on elevator usage frequency and manufacturer recommendations.

Maintenance personnel should check for:
- Cracks, peeling, swelling or oil contamination on the polyurethane surface.
- Exposed or broken steel cords inside the belt.
- Abnormal wear on belt edges, indicating misalignment.
- Delamination between the PU layer and steel cords.
- Any visible damage to the internal steel cords means the belt must be assessed and replaced according to the manufacturer's safety requirements, as it may pose a serious safety risk.
2. Maintain Correct Belt Tension and Alignment
Improper tension is one of the main causes of premature Elevator Steel Belt wear. Belts that are too loose can cause slipping, uneven wear and leveling errors, while belts that are too tight accelerate steel cord fatigue and increase bearing loads.
Best practices:
- Calibrate steel belt tension according to the manufacturer's specifications during installation and at the recommended maintenance intervals.
- Ensure even tension across all belts in a multi-belt system; uneven tension causes uneven load distribution.
- Check belt alignment regularly to avoid edge rubbing against sheave flanges.

3. Keep Belts Clean and Control Operating Environment
Polyurethane steel belts are sensitive to dust, grease, chemicals and extreme environmental conditions. Contaminants on the belt surface can accelerate wear and degrade the PU material over time.
Maintenance rules:
- Wipe belt surfaces with a clean, dry cloth regularly. Never use harsh chemical cleaners that may damage the PU layer.
- Avoid oil or grease contact with the belt; lubricants can reduce friction and cause traction slippage.
- For outdoor, humid or dusty installations, increase inspection frequency and select environment-specific belt grades recommended by the manufacturer.
4. Inspect Traction Sheaves and Deflection Pulleys Regularly
Sheave condition directly affects Elevator Steel Belt service life. A worn or damaged traction sheave can accelerate belt wear and affect traction performance.
During every maintenance visit:
- Check sheave groove dimensions and surface finish. Replace or resurface sheaves when wear exceeds manufacturer limits.
- Verify that sheave diameter meets the minimum bending radius requirements of the belt model.
- Ensure all pulleys rotate freely without bearing noise or jamming.
5. Monitor Operating Performance and Abnormal Signs
Many elevator traction belt problems show early warning signs before they become critical. Maintenance teams should pay attention to:
- Unusual noise or vibration during elevator operation.
- Belt tracking deviation or slipping.
- Frequent leveling accuracy errors.
- Increasing ride comfort complaints from passengers.
These symptoms often indicate tension issues, misalignment or early belt wear and should be investigated promptly.
6. Follow Manufacturer's Service Intervals and Specifications
Each Elevator Steel Belt model has specific maintenance requirements defined by its manufacturer. Deviating from these specifications can affect belt performance, warranty coverage and operational safety.
Always follow the original manufacturer's guidelines on:
- Recommended inspection and replacement intervals.
- Tension values and adjustment procedures.
- Compatible traction sheave specifications.
- Storage and handling requirements.
7. Use Certified Replacement Parts and Professional Technicians
Elevator Steel Belt maintenance and replacement should only be performed by qualified elevator technicians. Using unsuitable replacement belts or improper installation tools can lead to premature failure and safety hazards.
For replacement projects, always choose belts with valid type-test documentation and confirmed compatibility with your elevator system. Reliable suppliers can also provide technical guidance for correct belt identification, installation and tension adjustment.
Final Takeaway
Good Elevator Steel Belt maintenance is not just about preventing breakdowns - it is an investment in long-term safety and lower total cost of ownership. By following these 7 maintenance principles, you can help extend belt service life, reduce unplanned downtime and ensure reliable elevator operation year after year.

NONA ELEVATOR supplies Elevator Steel Belts and elevator traction belt replacement parts for various elevator systems, backed by product identification, compatibility checks and technical support. Contact us with your belt model or specifications for product recommendations and a quotation.





