Elevator Parts for MITSUBISHI
Elevator Parts for MITSUBISHI Supplier & OEM-Compatible Replacement Components
Direct-fit mechanical and electrical replacement parts for Mitsubishi GPS-2, GPS-3, GPS-CR, NexWay, ELENESSA, and Hope elevator systems. Supply includes main control boards, drive modules, door operators, traction sheaves, and signal fixtures verified for field compatibility.
Sourcing replacement parts for Mitsubishi elevators requires exact verification of PCB revision codes, software firmware versions, and serial bus communication protocols. We manufacture and warehouse direct-replacement components matching original terminal pinouts and mechanical mounting dimensions, eliminating field rewiring and reducing elevator downtime during maintenance or system retrofits.
Elevator Parts by Brand
|
Mitsubishi |
P1, DOR, KCD, KCE, and SP-VF series microboards, PM door drives, and gearless traction sheaves. |
|
OTIS |
GECB, LCB2, TCBC microboards, ReGen drives, DO2000 door operators, and polyurethane flat belts. |
|
KONE |
LCE CPU, OPT, OPT7 boards, KDM and V3F drives, MX06, MX10, MX18 sheaves, and AMD door drives. |
|
Schindler |
Smart MRL, 3300, 5500, Bionic 5 mainboards, and VAR15 door operators. |
|
ThyssenKrupp (TK Elevator) |
TAC32, CPI, Euro-Direct drives, and door interlocks. |
Control Boards & Drive Modules
Main logic boards including P203758B000G01, KCD-910, KCD-930, and KCE series with pre-configured firmware options.
VVVF drive modules and inverter gate drive boards for GPS and NexWay series featuring integrated heat-sink mounts.
Power supply boards, brake control boards, and load-weighing interface units.
Door Operator & Landing Hardware
PM and AC door operator control boards including DOR-120C, DOR-140, and MP door controllers.
Hanger rollers, eccentric locks, belt tracks, and door vane assemblies.
Infrared light curtains with 154-beam matrix and ambient light filter circuitry.
Traction Machines & Sheaves
Cast-iron and ductile-iron traction sheaves for Mitsubishi PM gearless and geared machines.
Hardened groove profiles rated HB 210-250 optimized for 8mm, 10mm, and 12mm steel wire ropes.
Electromagnetic brake solenoids, brake shoe linings, and encoder interface units.
Signal Fixtures & Shaft Sensors
Car Operating Panels (COP) and Landing Operating Panels (LOP) utilizing Mitsubishi serial communication protocols.
Position indicators including Dot-Matrix, LCD, and TFT displays matching original faceplate cutouts.
Levelling sensors, reed switches, limit switches, and traveling cable assemblies.
Safety Devices & Mechanical Hardware
Progressive safety gears, speed governors, and oil buffers compliant with EN81 and ASME codes.
Guide shoes, sliding inserts, counterweight frames, and compensation chains.
Specifications, MOQ & Lead Time
|
Parameter |
Specification |
|
Minimum Order Quantity (MOQ) |
1 piece for control boards, drives, door operators, and sheaves; 10 pieces for wear items such as rollers and push buttons |
|
Operating Voltage |
AC 220V / 380V / 400V / 415V, 50/60 Hz; DC 24V / 125V control logic |
|
Sheave Material Grade |
QT500-7 ductile iron with induction-hardened grooves; hardness HB 210–250 |
|
Enclosure Protection Rating |
IP20 for control boards; IP54 for door drive assemblies |
|
Standard Production Lead Time |
24–48 hours for in-stock electronic boards, rollers, and sensors; 7–10 working days for customized sheaves and controller cabinets |
GPS Series Serial Control System Overlay Replaces legacy GPS or relay-based controller cabinets with updated serial control systems while retaining original hoistways, guide rails, and car frames. Reduces installation time using pre-labeled terminal interface boards.
PM Door Operator Conversion Package Upgrades older AC door operators to VVVF Permanent Magnet Synchronous Motor (PMSM) door drive systems. Includes pre-drilled adapter plates tailored to original Mitsubishi door headers.
Traction Machine & Sheave Retrofit Direct replacement of worn traction sheaves or complete conversion to compact gearless PMSM driving machines, lowering noise levels and extending wire rope operating life.
Mitsubishi Part Number or PCB marking code such as P203758B000G01, KCD-910, or DOR-120C.
Sheave Specifications: Pitch diameter, number of grooves, rope diameter, and shaft bore dimensions.
Drive or Inverter Rating: kW rating, input AC voltage, and encoder type such as Incremental or Absolute.
Door Operator Type: PM or AC motor drive, opening width, and door operator model marking.
Our engineering team checks circuit pinouts, software jumper layouts, and physical mounting footprints before dispatch.
Quality Control & Testing
Automated Optical Inspection (AOI)
Printed circuit boards undergo 100 percent AOI testing followed by in-circuit functional simulation.
Thermal Load Burn-In
Microboards and inverter drive modules undergo a 24-hour continuous burn-in cycle under full electrical load.
Dynamic Sheave Balancing
Traction sheaves are statically and dynamically balanced to ISO 1940 G2.5 standards.
Pinout & Protocol Verification
Every replacement board is checked against Mitsubishi original pin definitions and serial signal protocols.
Packaging, Delivery & After-Sales
Packaging: Anti-static ESD shielding bags for electronic boards; export plywood cases with internal foam protection for sheaves, drives, and door operators.
Shipping Options: Express air delivery via DHL, FedEx, or UPS for urgent elevator repairs; ocean freight in FCL or LCL for bulk orders.
Technical Documents: Shipment includes wiring connection diagrams, DIP switch setup guides, and parameter mapping sheets.
Warranty: 12 months for electronic circuit boards; 18 months for mechanical sheaves and driving machinery.
Certificate
fAQ