Elevator Parts for MONARCH

Elevator Parts for MONARCH | Supplier & Integrated Control Components

NONA Elevator supplies OEM-equivalent and replacement components for MONARCH (Inovance) integrated elevator control systems. We support independent elevator service companies, modernization contractors, and spare parts distributors with control boards, PG feedback cards, door operators, and pre-wired integrated control cabinets.
All electronic boards and drive modules are supplied with unlocked firmware and undergo full-load test tower verification before shipping to ensure direct on-site parameter configuration and protocol compatibility.

First 12 Last 1/2

Elevator Parts for Repair, Replacement & Modernization

Emergency Repair Components

Unlocked main control boards, PG encoder cards, car top communication modules, and hall call display boards ready for immediate dispatch.

Maintenance Replacement Stock

High-demand peripheral items, including door operator drives, load-weighing sensors, arrival lanterns, and photo-switches.

Complete Modernization Packages

Pre-wired control cabinets based on NICE3000+ and NICE1000+ integrated controllers, designed for rapid shaft cable integration.

Elevator Parts by System Series Compatibility

Control Platform / Series	Supported Hardware & PCB Components	Typical Applications
NICE3000+ Series	Main control boards (MCTC-MCB-C2 / C3), Car top boards (MCTC-CTB), PG cards	Gearless PMSM & geared traction elevators up to 4.0 m/s
NICE1000+ Series	Integrated drive boards, hall call boards (MCTC-HCB), LCD display panels	Standard residential & low-rise commercial elevators
NICE900 Series	Door drive controller units, VVVF door motor interface modules	Elevator cabin door operators & landing door operators
NICE-L-A Series	Escalator main control boards, drive modules, phase monitoring units	Commercial escalators & moving walkways

Elevator Components by Type

1. Integrated Controllers & Main Boards
Main Control Boards: MCTC-MCB-C1, MCTC-MCB-C2, and MCTC-MCB-C3 series pre-loaded with open-access firmware versions for easy programming via handheld operators.

Car Top Communication Boards: MCTC-CTB-A and MCTC-CTB-B modules supporting serial CAN-bus links between cabin equipment and the controller.

Hall Call & Display Boards: MCTC-HCB series featuring segment LED, dot matrix, and TFT color LCD displays with selectable floor button protocols.

2. Encoder PG Cards & Interface Modules
SinCos PG Cards: MCTC-PG-A and MCTC-PG-E modules for permanent magnet synchronous motors (PMSM) using ERN1387 or SinCos encoders.

Incremental PG Cards: MCTC-PG-B modules supporting 12V / 5V push-pull and line-driver encoders for standard asynchronous motors.

Absolute Encoder Cards: MCTC-PG-D modules supporting EnDat 2.1 / 2.2 protocols for gearless machines.

3. Door Operators & Accessories
Integrated Door Controllers: NICE900 door drives with auto-tuning door width functions and obstacle detecting torque limits.

Handheld Programmers: MD210 and MCTC-KEY operators for parameter monitoring, error code diagnostic retrieval, and firmware flashing.

Monarch Elevator Voice Announciator MCTC-CHM-B

Specifications, MOQ & Lead Time

Parameter / Category	Standard Specification / Condition
Minimum Order Quantity (MOQ)	1 piece for electronic boards, PG cards, and door drives.
Standard Lead Time	Stock PCB items: 24-48 hours dispatch. Modernization cabinets: 5-7 working days.
Operating Temperature	-10 deg C to +60 deg C (Electronics & drive modules).
Voltage Range	3-Phase AC 380V/400V/415V +/- 15%, 50/60 Hz; Single-phase 220V for door operators.
Certification Standards	CE, ISO9001, EN 81-20/50 safety standard compliance.
Warranty Period	12 months replacement warranty on control boards and integrated controllers.

MCTC-CHM-B Elevator Lift Voice Annunciator

Elevator Modernization Solutions

We manufacture customized modernization control cabinets built around MONARCH NICE3000+ integrated controllers. These packages allow contractors to upgrade obsolete relay or microprocessor panels while preserving existing guide rails, car frames, and counterweights.

Retained Mechanical Systems:
Elevator guide rails and bracket assemblies
Car frame, safety gear, and counterweight system
Existing landing doors and mechanical sills

Upgraded Control Package Hardware:
MONARCH NICE3000+ Pre-wired Control Cabinet
Plug-and-play Travelling Cable and Shaft Wiring Harness
MCTC-CTB Car Top Inspection Box
Full Set of MCTC-HCB Hall Call Fixtures and COP Signal Units

Modernization Technical Specifications:
Control Interface: Dual 32-bit CPU processing with serial CAN-bus communication.
Motor Compatibility: Supports both PMSM gearless machines and asynchronous geared motors from 2.2 kW to 45 kW.
Code Compliance: Conforms to EN 81-20/50 and GB 7588 safety standards.

Compatibility & Model Matching

Board Part & Version Number

Confirm the complete board code (such as MCTC-MCB-C2) and the software version printed on the microcontroller sticker.

Motor & Encoder Type

For PG card orders, state whether the motor is PM synchronous or induction, along with the encoder brand and signal output type.

Power Rating

For integrated controllers, match the motor nameplate kW rating, operating voltage (AC 380V +/- 15%), and rated output current.

Quality Control & Testing

Full-Load Motor Simulator Testing

Control boards and integrated drives are tested on motor-loaded rigs to verify current output and thermal stability under actual operation cycles.

CAN-bus Protocol Matching

Every MCTC-CTB and MCTC-HCB board undergoes serial communication validation to confirm signal integrity across all floor nodes.

Firmware Unlocking Verification

Firmware access levels are verified using handheld programmers to guarantee open parameter modification for site technicians.

SMT Optical Inspection

Surface-mount components are verified using Automated Optical Inspection (AOI) to eliminate cold solder joints and pin short circuits.

Packaging, Delivery & After-Sales

ESD Protective Packaging: Control boards are sealed in anti-static shielding bags with desiccant packs and thick EPE foam padding.

Export Packaging: Integrated cabinets and heavy drive units are secured inside IPPC-certified fumigation-free plywood crates.

Global Shipping: Fast air freight via DHL, FedEx, or UPS for emergency repair orders; sea container shipping for bulk cabinet orders.

Technical Support: Dedicated technical assistance for MONARCH error code diagnostics (such as E10, E35, E51), parameter backup, and encoder auto-tuning guidance.

productcate-1-1

Certificate

fAQ

Q: How do I know if a replacement MONARCH MCTC board is compatible with my existing system software?

A: Provide us with the exact part number (such as MCTC-MCB-C2) and a clear photo of the software version sticker located on the main chip. Our engineering team checks software compatibility in our database to ensure the board communicates correctly with your car top board and hall displays.

Q: Are your replacement MONARCH boards unlocked for parameter editing?

A: Yes. All control boards supplied by NONA Elevator feature unlocked factory firmware. Field technicians can access, modify, and save parameter settings using a standard MONARCH handheld operator without encountering OEM password restrictions.

Q: What details are required when replacing a MONARCH PG encoder card?

A: You need to provide the PG card model (such as MCTC-PG-A or MCTC-PG-B), motor type (PMSM gearless or asynchronous), and encoder specification (such as ERN1387, Push-Pull, or Line Driver with supply voltage details).

Q: Can a NICE3000+ integrated controller be used to modernize elevators made by other manufacturers?

A: Yes. The NICE3000+ system operates as a universal controller for both PMSM gearless and asynchronous geared motors. When paired with our pre-wired cabinet package and car top module, it replaces older relay or microprocessor control panels regardless of the original elevator brand.

Q: How do I clear communication error codes like E51 or E52 after installing a new board?

A: E51 and E52 codes indicate CAN-bus communication faults between the main board (MCB), car top board (CTB), or hall call boards (HCB). Check terminal resistor jumper settings, confirm baud rate parameters, and inspect shield grounding on the communication cable. Our tech support team can walk you through this process.

Q: What is the standard warranty and emergency dispatch timeframe for MONARCH parts?

A: In-stock control boards, PG cards, and display modules ship within 24 to 48 hours via international express courier, arriving at most locations within 3 to 5 business days. All electronics carry a 12-month replacement warranty from the date of shipment.

As one of the leading elevator parts for monarch manufacturers and suppliers in China, we warmly welcome you to wholesale bulk elevator parts for monarch in stock here from our factory. All elevator parts are with high quality and competitive price. For pricelist, contact us now. MONARCH Elevator Board MCTC COB A1, MONARCH Elevator Display Board MCTC HCB R1, MONARCH Elevator Main Board MCTC MCB C2 C3 B